Click on the image to check the artwork
By certification 
Parameters of high-voltage cable
High-voltage cable is a kind of power cable and means the power cable for transmitting the voltage within 10KV-35KV (1KV=1000V), and is mostly applied in the main road of power transmission. The executive standards of high-voltage cable product are GB/T 12706.2-2008 and GB/T 12706.3-2008.
2: Detailed description
① Conductor: Copper or aluminum
② Insulation: Cross-linked polyethylene
③ Filler: Filler strip
④ Packaging: Wood shaft or packaging bag, depending on your requirement
⑤ Outer sheath: Polyethylene
⑥ Armoring: Fine steel wire armoring or steel tape armoring
Service characteristics of high-voltage cable: This product is applicable to the fixed laying lines for power supply, transmission and distribution with AC rated voltage of 35KV and below. The maximum long-time operating temperature of cable conductor is 90℃, and in case of short circuit (not exceeding 5S at most), the maximum temperature of cable conductor is not greater than 250℃.
Standard sectional areas: 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2.
High-voltage cable is a kind of power cable and means the power cable for transmitting the voltage within 10KV-35KV (1KV=1000V), and is mostly applied in the main road of power transmission. The executive standards of high-voltage cable product are GB/T 12706.2-2008 and GB/T 12706.3-2008.
2: Detailed description
① Conductor: Copper or aluminum
② Insulation: Cross-linked polyethylene
③ Filler: Filler strip
④ Packaging: Wood shaft or packaging bag, depending on your requirement
⑤ Outer sheath: Polyethylene
⑥ Armoring: Fine steel wire armoring or steel tape armoring
Service characteristics of high-voltage cable: This product is applicable to the fixed laying lines for power supply, transmission and distribution with AC rated voltage of 35KV and below. The maximum long-time operating temperature of cable conductor is 90℃, and in case of short circuit (not exceeding 5S at most), the maximum temperature of cable conductor is not greater than 250℃.
Standard sectional areas: 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2.
