Click on the image to check the artwork
By certification 
Introduction
SolderGrip heat-shrinkable solder-type closed-end connector is designed for electrical termination of multiple-wire combinations. It provides reliable alternative to crimping, welding, or conventional twist-on-style closed-end connectors. The unique combination of wire fixturing and controlled soldering technology provides dependable electrical termination of multiple wire combinations. SolderGrip terminators consist of a heat-shrinkable thermoplastic sleeve containing a spiral-wound copper insert. The insert is fitted with a pre-fluxed solder band. Shrink closed-end connectors can replace wire nuts in environments where need to be sealed. Color coded glass ball identifies the proper wire sizes to use.
Feature and Advantage
Shrink ratio: 2:1
Waterproof for wiring splices
Transparent sleeve provides visual inspection
High elasticity assures steady performance
Easy control of soldering process
Operating temperature: -55℃～150℃
Minimum shrink temperature: 200℃
Specification
Product Code |
Ball Color |
Product Dimensions (mm) |
Copper Cross Section (mm2) |
Qty Solder |
|||
ΦA |
L |
B |
Min |
Max |
|||
HP-SST-SGRS-05-01 |
Green |
3.6 |
38 |
26 |
0.7 |
2.4 |
1 |
HP-SST-SGRS-05-02 |
Red |
5.0 |
38 |
26 |
2.0 |
4.0 |
1 |
HP-SST-SGRS-05-03 |
Blue |
7.5 |
45 |
30 |
3.5 |
8.0 |
1 |
HP-SST-SGRS-05-04 |
Yellow |
9.4 |
45 |
30 |
7.5 |
12.0 |
1 |
http://www.raytechsh.com/
